T4000 Gas HEPA Extractor
T4000 Gas is one of the newest members of Ermator’s HEPA dust extractors. The high water lift secures high suction with enough power for mid sized grinders scarifiers saws and shop blasters.
A powerful dust separator suitable for fine dust, it can handle building, grinding, plaster and concrete dust. Equipped with a fine filter (flushable) and H13 filter which meets the asbestos requirements. An hour counter and vacuum meter for filter control are supplied as standard. The wheels are non-marking, puncture free and lockable at the front. Supplied fitted and complete with cleaning equipment and transport protection.
The T4000 Gas features a large pre-filtration surface, long lasting suction power and low filter cost. Individually tested and certified HEPA filters provide a safe environment for the operator and other job site workers.
Like all Ermator vacuums, T4000 Gas is equipped with drop down disposal, Longopac collection system, JetPulse filter cleaning and a manometer.
|Engine Type||Honda 11 HP Air-cooled 4-stroke OHV||Bore x Stroke||88 X 64 mm|
|Displacement||389 cm3||Net Power Output*||10.2 HP (7.6 kW) @ 3,600 rpm|
|Net Torque ||17.8 lb-ft (24.2 Nm) @ 2,500 rpm||PTO Shaft Rotation||Counterclockwise (from PTO shaft side)|
|Compression Ratio||7.7:1||Lamp/Charge coil options||3A / 1A, 3A, 10A|
|Carburetor||Float Type||Ignition System||Transistorized magneto|
|Starting System||Recoil/electric||Lubrication System||Pressure and splash|
|Governor System||Centrifugal Mechanical||Air cleaner||Dual element|
|Oil Capacity||1.2 US qt (1.1l)|